Instrument Functions
This machine is suitable for all kinds of connector insertion force and pull-out force test, to provide a variety of connector fixture and with the patented design of the automatic centering device, will be able to get completely accurate insertion and extraction force test.
Test Items
*Connector single-hole insertion and extraction test
*Connector insertion and removal life test
*Connector Normal Force Test
*All kinds of compression and tensile destructive strength test
*Connector row insertion and removal test
*Connector single Pin and plastic retention force test
the technical parameters
Maximum load: 50kg
Accuracy of load element: 0.2%FS
Load display accuracy: 0.001g
Stroke display accuracy: 0.001mm
Maximum measuring height: 150mm
Speed range: 0-300mm/min,
Resistance range: 3000mΩ, display accuracy 0.01mΩ
X, Y axis moving range: 0-70mm
Transmission mechanism: ball screw
Appearance size: 390*280*1035mm
Minimum fine-tuning distance: 0.01mm
Power supply: 220V
Instrument combination:
 1. Test body
2. Industrial computer. 17-inch LCD color display
3. Load 50Kg
4.Large X-Y moving load table
5. Automatic centering device (multifunctional fixture)
instrument features:
 1. test conditions can be set in writing by the computer, and can be stored. Set by the drop-down menu checklist, or directly enter the data. (including the test category, measurement of the direction of movement, load measurement range, travel measurement range, travel home position, travel home detection, measurement speed, measurement of the total number of times, pause time, each time to wait for the position, the number of times the air pressure;)
 2. Graphs can be stored and printed (load-stroke curve, load decay life curve, inspection report);
  3. Load cell overload protection function to ensure that the load cell will not be damaged. 4;
  4. Load-stroke curve and life curve are displayed at the same time;
  5. automatic load zero detection, and can be set to check the load value at the origin;
  6. Load unit display N, lb, gf, kgf can be freely switched. 7;
  7. several load elements can be used at the same time. (2kgf, 5kgf, 20kgf, 50kgf (optional). 8;
  8. The machine is designed with high steel structure, which can ensure the accuracy under long time use, and is suitable for general tensioning, compression test and insertion/extraction force life test.
  9. Over specification value stop. (In the life test, test data beyond the set upper and lower limits of the specification value of the machine automatically stop).